QOLSYS IQ WIRELESS FLOOD SENSOR
Qolsys Security
QOLSYS IQ WIRELESS FLOOD SENSOR
- Buy 2 for $68.00 each and save 3%
- Buy 5 for $66.00 each and save 6%
- Buy 10 for $64.00 each and save 9%
IQ FLOOD-S
The IQ Flood detects the presence of water and allows you to know when potential flooding occurs before extensive damage is done. Great for installing at the base of water heaters, washing machines, sinks, and more. Includes a 6’ wire with water contact sensor.
Features:
- 6’ cord
- Water “bug” can be fastened to the floor to the wall
- Reports water presence to IQ Panel
- Get e-mail or text alerts if there is water detected
Specifications:
- Sensor: 2.5”H x 1”W x .5”D
- Wireless signal range: 600ft (200M), open air. Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
- (2) -Panasonic CR2032 -Energizer CR2032 -Duracell DL2032
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Replaces part #QOL-QS5516-840.
Part # | QOL-QS5536-840 |
---|---|
MFR | QOLSYS |
IQ FLOOD-S
The IQ Flood detects the presence of water and allows you to know when potential flooding occurs before extensive damage is done. Great for installing at the base of water heaters, washing machines, sinks, and more. Includes a 6’ wire with water contact sensor.
Features:
- 6’ cord
- Water “bug” can be fastened to the floor to the wall
- Reports water presence to IQ Panel
- Get e-mail or text alerts if there is water detected
Specifications:
- Sensor: 2.5”H x 1”W x .5”D
- Wireless signal range: 600ft (200M), open air. Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
- (2) -Panasonic CR2032 -Energizer CR2032 -Duracell DL2032
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Replaces part #QOL-QS5516-840.