HDMI EXTENDER OVER COAX WITH IR
COAX & Audio/Video
HDMI EXTENDER OVER COAX WITH IR
Part # EVEX2004
In Stock
Special Price2131
$532.00
Regular Price
$559.95
- Buy 2 for $504.00 each and save 5%
HDMI Extender Over COAX with IR.
Features:
- Allows HDMI audio/video signals to be transmitted using a single coaxial cable
- Wide band Bi-directional IR system (20KHz to 60KHz) allowing for control of source or display
- Transmission Range: Extends 1080p resolution up to 394ft/120m over RG6 coaxial cable (dual and quad-shielded); Extends 1080p resolution up to 164ft/50m over RG59 coaxial cable
- Works with HDMI and HDCP compliant devices
- Supports up to 1080p/60 High Definition resolution
- Supports video resolutions 480i- 576i- 720p- 1080i- and 1080p
- 7.1-channel audio supported; Supports DTS-HD and Dolby TrueHD high bit rate audio
- EDID manual select control – Supports Copy EDID
- Compact and wall mounting housing design for easy and robust installation
- Fully compatible with any Evolution by Vanco product
- Dimensions: 3.35” (85mm) W x 1.1” (28mm) H x 3.19” (81mm) D
Includes:
- EVEX2004 (TX & RX)
- IR Blaster (TX)
- IR Receiver (RX)
- (2) DC 5V power supplies
- Mounting hardware
- Product Manual
Do you need a Patch Cable? Cabling? CommGear sells them. Install and service at an additional charge.
Additional Information
Part # | EVEX2004 |
---|---|
MFR | VANCO |
Details
HDMI Extender Over COAX with IR.
Features:
- Allows HDMI audio/video signals to be transmitted using a single coaxial cable
- Wide band Bi-directional IR system (20KHz to 60KHz) allowing for control of source or display
- Transmission Range: Extends 1080p resolution up to 394ft/120m over RG6 coaxial cable (dual and quad-shielded); Extends 1080p resolution up to 164ft/50m over RG59 coaxial cable
- Works with HDMI and HDCP compliant devices
- Supports up to 1080p/60 High Definition resolution
- Supports video resolutions 480i- 576i- 720p- 1080i- and 1080p
- 7.1-channel audio supported; Supports DTS-HD and Dolby TrueHD high bit rate audio
- EDID manual select control – Supports Copy EDID
- Compact and wall mounting housing design for easy and robust installation
- Fully compatible with any Evolution by Vanco product
- Dimensions: 3.35” (85mm) W x 1.1” (28mm) H x 3.19” (81mm) D
Includes:
- EVEX2004 (TX & RX)
- IR Blaster (TX)
- IR Receiver (RX)
- (2) DC 5V power supplies
- Mounting hardware
- Product Manual
Do you need a Patch Cable? Cabling? CommGear sells them. Install and service at an additional charge.
Reviews
Write Your Own Review