Wishlist My Cart -

Questions? We've got answers!
Call Us Today: 919-854-7986

ROHN UNIVERSAL MAST ROOF MOUNT

Masts

ROHN UNIVERSAL MAST ROOF MOUNT

Part # R-ETMB
In Stock
Special Price2131 $145.00 Regular Price $150.00
- +

LEAD-TIME 3-4 WEEKS

Rohn Universal Mast Roof Mount

ROHN Universal Mast Roof Mounts are completely assembled for a quick and easy flat or sloped roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter.

Their convenient hinge feature allows tall masts to be swung up or down with ease. The bottom of the mast inserts into the hinged base and is secured in the base clamp. This hinge feature permits quick and safe access to antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these roof mounts supply the base-support and flexibility that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, concrete pads, or just about anything!

Fixed or telescopic masts are an inexpensive solution for raising antennas! These ROHN Universal Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!

Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster Installations (not included). All Telescoping push-up Masts are galvanized and come with hardware designed to support light duty antennas in various applications. The unique Rohn design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common mast. Each section extends deeper into the lower tubes than most designs, adding to the masts stability. Height describes the overall pipe length. Due to overlapping, extended masts will be shorter. This Mast extends to about 19 Feet in actual height and ships to Commercial and Residential addresses alike.

Available in 20', 30', 40' and 50' heights. All ROHN  Telescoping Masts are pre-galvanized and come assembled with hardware.

Erecting the Telescoping Mast is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, extend the sections, insert the locking cotter pins, rotating the tubes to a locked position, and tightening the clamps.

The unique ROHN Telescoping Mast design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common masts. This exclusive design also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end.

Each section extends deeper in to the lower tubes than most other Telescoping Mast designs, adding still further to the stability of the structure.

H Series
This heavy duty series of Telescoping Masts uses 1-1/4" 16 gauge galvanized tubing for top section. All other sections are 18 gauge.

 

Learn More

Do you need Cabling?  CommGear can install and service at an additional charge.

Additional Information
More Information
Part # R-ETMB
MFR ROHN
Details

LEAD-TIME 3-4 WEEKS

Rohn Universal Mast Roof Mount

ROHN Universal Mast Roof Mounts are completely assembled for a quick and easy flat or sloped roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter.

Their convenient hinge feature allows tall masts to be swung up or down with ease. The bottom of the mast inserts into the hinged base and is secured in the base clamp. This hinge feature permits quick and safe access to antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these roof mounts supply the base-support and flexibility that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, concrete pads, or just about anything!

Fixed or telescopic masts are an inexpensive solution for raising antennas! These ROHN Universal Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!

Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster Installations (not included). All Telescoping push-up Masts are galvanized and come with hardware designed to support light duty antennas in various applications. The unique Rohn design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common mast. Each section extends deeper into the lower tubes than most designs, adding to the masts stability. Height describes the overall pipe length. Due to overlapping, extended masts will be shorter. This Mast extends to about 19 Feet in actual height and ships to Commercial and Residential addresses alike.

Available in 20', 30', 40' and 50' heights. All ROHN  Telescoping Masts are pre-galvanized and come assembled with hardware.

Erecting the Telescoping Mast is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, extend the sections, insert the locking cotter pins, rotating the tubes to a locked position, and tightening the clamps.

The unique ROHN Telescoping Mast design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common masts. This exclusive design also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end.

Each section extends deeper in to the lower tubes than most other Telescoping Mast designs, adding still further to the stability of the structure.

H Series
This heavy duty series of Telescoping Masts uses 1-1/4" 16 gauge galvanized tubing for top section. All other sections are 18 gauge.

 

Learn More

Do you need Cabling?  CommGear can install and service at an additional charge.

Reviews
Write Your Own Review
Your Rating

You may also like