Wilson Pro 1050 Signal Booster System
4G / 35,000 sq.ft.
EXPECTED INDOOR COVERAGE
- 10,000 sq. ft. with 1-2 bars(-100 dB) of outside signal
- 20,000 sq. ft. with 3-4 bars (-90 dB) of outside signal
- 35,000 sq. ft. with 5 bars of outside signal
The WilsonPro Pro 1050 cell signal booster system provides significantly enhanced voice and data coverage including 4G LTE deep inside large homes or other buildings by compensating for signal loss caused by long cable runs. As cell signal moves over long lengths of coax cable some is lost, reducing booster system performance. The Pro 1050 booster system addresses this technical problem by employing two separate boosters - a main signal booster and a supplementary inline booster.
- WilsonPro's first two-part booster system
- Can compensate for up to 300 ft. of cable loss
- Boosters sold in kits with antennas
- Expansion kits available for large scale installations
- Compatible with all North American cellular networks
- Self-optimizing design minimizes installation time
- Three year warranty
- Bidirectional amplifiers (boosters) detect and collect very faint cell signals—much fainter than your phone can detect.
- The boosters amplify faint signals to a useable level.
- The amplifiers broadcast the boosted signal inside a commercial building, allowing them to be picked up by your phone or other cellular device.
- Qty. (1) 1050 Two-Part Booster System #460230
- Qty. (1) Outside Directional Antenna #314411
- Qty. (1) Lightning Surge Protector, 50 Ohm #859902
- Qty. (1) Inside Dome Antenna #304412
- Qty. (1) 2 FT. Wilson 400 Cable #952302
- Qty. (1) 75 FT. Wilson 400 Cable #952375
- Qty. (2) 100 FT. Wilson 400 Cable #952300
- Qty. (1) Installation Manual & Instructions #460230
3 year Warranty.
Do you need Cabling? CommGear can install and service at an additional charge.