Questions? We've got answers!
Call Us Today: 919-854-7986
GENTEX COMBINATION PHOTOELECTRIC SMOKE AND CARBON MONOXIDE HARDWIRED ALARM
Sirens
GENTEX COMBINATION PHOTOELECTRIC SMOKE AND CARBON MONOXIDE HARDWIRED ALARM
- Buy 2 for $118.00 each and save 2%
- Buy 3 for $116.00 each and save 3%
- Buy 5 for $114.00 each and save 5%
The Gentex GN-SCR combination photoelectric smoke and electrochemical carbon monoxide (CO) alarm is for use as an evacuation device in all dwelling units, including but not limited to homes, apartments, hospitals and hotels/motels. The GN-SCR is engineered to eliminate nuisance alarms and deliver outstanding performance wherever reliable smoke and CO protection is required. The GN-SCR is ANSI/UL 217 and ANSI/UL 2034 listed and in compliance with NFPA 72 and NFPA 720.
Features:
- 120VAC with 9VDC battery back-up
- Temporal 3 evacuation piezo horn with a 3100Hz nominal horn frequency for smoke annunciation
- Temporal 4 evacuation piezo horn with a 3100 Hz nominal horn frequency for CO annunciation
- Push button self test feature
- DualinkFeature: tandem with all Gentex tandem capable alarms
- Quick disconnect wiring harness
- Dust cover to to prevent contamination during installation
- Low or missing battery indicator
- End of life signal indicates CO sensor has reached depletion state and time to replace
- 1 year warranty from date of purchase
- California residents see Prop 65 WARNINGS
CommGear can install and service at an additional charge.
Replaces part #GN503.
| Part # | 918-0032-002 / GN-SCR |
|---|---|
| MFR | GENTEX |
The Gentex GN-SCR combination photoelectric smoke and electrochemical carbon monoxide (CO) alarm is for use as an evacuation device in all dwelling units, including but not limited to homes, apartments, hospitals and hotels/motels. The GN-SCR is engineered to eliminate nuisance alarms and deliver outstanding performance wherever reliable smoke and CO protection is required. The GN-SCR is ANSI/UL 217 and ANSI/UL 2034 listed and in compliance with NFPA 72 and NFPA 720.
Features:
- 120VAC with 9VDC battery back-up
- Temporal 3 evacuation piezo horn with a 3100Hz nominal horn frequency for smoke annunciation
- Temporal 4 evacuation piezo horn with a 3100 Hz nominal horn frequency for CO annunciation
- Push button self test feature
- DualinkFeature: tandem with all Gentex tandem capable alarms
- Quick disconnect wiring harness
- Dust cover to to prevent contamination during installation
- Low or missing battery indicator
- End of life signal indicates CO sensor has reached depletion state and time to replace
- 1 year warranty from date of purchase
- California residents see Prop 65 WARNINGS
CommGear can install and service at an additional charge.
Replaces part #GN503.
