VALCOM V-9964 DIGITAL FEEDBACK ELIMINATOR/MESSAGE STACKER
Featured Products
VALCOM V-9964 DIGITAL FEEDBACK ELIMINATOR/MESSAGE STACKER
- Buy 2 for $880.00 each and save 3%
The V-9964 is designed to eliminate acoustic feedback and act as a message stacker. When a page is made, the message is digitized and saved. Upon completion of the live page, the message is released for broadcast over the speakers. While a message is being broadcast, additional messages may be recorded with a maximum of 4 messages queued per V-9964. Additionally, up to four V-9964 units may be chained together to allow up to sixteen messages to be simultaneously processed.
Features:
- Automatic Gain Control (AGC)
- Adjustable VOX sensitivity
- Compatible with Valcom Multi-Zone Control Units and Station Adaptors
- Two input channels: Switch selectable primary and priority, or two channels with equal priority; both inputs are switch selectable for Loop Start or VOX operation
- Two audio outputs: 600 Ohms with loop supervision to a page control unit or 8 Ohms line level output to amplified speakers
- Background music input
- Total of three normally open relay contacts for PLAY, RECORD and BUSY mode (one contact each)
- LED status indicators for POWER, RECORD, PLAY and BUSY
- Dip switch option programming
- Message abort feature
Do you need a Cable Run? Ceiling Speakers and Paging Horns? CommGear sells them. Install and service at an additional charge.
Part # | V-9964 |
---|---|
MFR | VALCOM |
The V-9964 is designed to eliminate acoustic feedback and act as a message stacker. When a page is made, the message is digitized and saved. Upon completion of the live page, the message is released for broadcast over the speakers. While a message is being broadcast, additional messages may be recorded with a maximum of 4 messages queued per V-9964. Additionally, up to four V-9964 units may be chained together to allow up to sixteen messages to be simultaneously processed.
Features:
- Automatic Gain Control (AGC)
- Adjustable VOX sensitivity
- Compatible with Valcom Multi-Zone Control Units and Station Adaptors
- Two input channels: Switch selectable primary and priority, or two channels with equal priority; both inputs are switch selectable for Loop Start or VOX operation
- Two audio outputs: 600 Ohms with loop supervision to a page control unit or 8 Ohms line level output to amplified speakers
- Background music input
- Total of three normally open relay contacts for PLAY, RECORD and BUSY mode (one contact each)
- LED status indicators for POWER, RECORD, PLAY and BUSY
- Dip switch option programming
- Message abort feature
Do you need a Cable Run? Ceiling Speakers and Paging Horns? CommGear sells them. Install and service at an additional charge.