Cisco 870 Integrated Services Router #CISCO871-SEC-K9 (Used)

Specifications:

General:

• Device Type: Router. 
• Form Factor: External.
• Width: 10.2 in., Depth: 8.5 in., Height: 2 in., Weight: 2.2 lbs.
• Memory: RAM: 128 MB (installed) / 256 MB (max).
• Flash Memory: 24 MB (installed) / 52 MB (max).
• Networking: Connectivity Technology: Wired.
• Integrated Switch: 4-port switch. 
• Data Link Protocol: Ethernet, Fast Ethernet.
• Switching Protocol: Ethernet.
• Network / Transport Protocol: PPTP, L2TP, IPSec, PPPoE, PPPoA.
• Routing Protocol: RIP-1, RIP-2.
• Remote Management Protocol: SNMP, Telnet, HTTP.
• Features: Firewall protection, DHCP support, VPN, VLAN support, auto-uplink, manageable, IPv6 support, Intrusion Prevention System    (IPS).
• Compliant Standards: IEEE 802.1x.  
• Expansion / Connectivity: Interfaces: 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ª 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN ) ª 2 x Hi-Speed USB - 4 pin USB Type A ª 1 x management - console - RJ-45 
• Miscellaneous: Encryption Algorithm: Triple DES, AES.
• Authentication Method: RADIUS, TACACS+.
• Compliant Standards: EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZ 3548 Class B, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, EN 60555-2 
• Power Device: Power adapter – external.
• Voltage Required: AC 120/230 V ( 50/60 Hz ). 
• Power Provided: 26 Watt.

Sold As-Is.

Do you need an Equipment Rack?  Cable Run?  Patch Panels with Patch Cords?  CommGear sells them.  Install and service at an additional charge.