LINEAR DXT-42 2-BUTTON 3-CHANNEL KEY RING TRANSMITTER
Security Systems
LINEAR DXT-42 2-BUTTON 3-CHANNEL KEY RING TRANSMITTER
- Buy 2 for $55.00 each and save 7%
- Buy 5 for $53.00 each and save 10%
- Buy 10 for $51.00 each and save 14%
The Model DXT-42 2-Button, 3-Channel Key Ring Transmitter is a battery powered, portable, miniature transmitter designed for use with Linear’s DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications. Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
The DXT-42 is a two-button, three-code transmitter. Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
The DXT-42 is powered from two 3-Volt Type 1616 lithium batteries with an expected battery life of up to 5 years. When the transmitter’s range decreases, or stops functioning, replace the batteries.
A detachable key ring is provided with each transmitter.
Features:
- Two type 1616 lithium batteries supplied
- Detachable key ring supplied
- DX format
- RF frequency: 315 MHz
- 1.25″ W x 2.25″ H x 0.48″ D
- Order number: SNT00382
Replaces part #DXT-21 / SNT00376
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Discontinued.
Part # | DXT-42 / SNT00382 |
---|---|
MFR | LINEAR |
The Model DXT-42 2-Button, 3-Channel Key Ring Transmitter is a battery powered, portable, miniature transmitter designed for use with Linear’s DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications. Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
The DXT-42 is a two-button, three-code transmitter. Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
The DXT-42 is powered from two 3-Volt Type 1616 lithium batteries with an expected battery life of up to 5 years. When the transmitter’s range decreases, or stops functioning, replace the batteries.
A detachable key ring is provided with each transmitter.
Features:
- Two type 1616 lithium batteries supplied
- Detachable key ring supplied
- DX format
- RF frequency: 315 MHz
- 1.25″ W x 2.25″ H x 0.48″ D
- Order number: SNT00382
Replaces part #DXT-21 / SNT00376
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Discontinued.