Questions? We've got answers!
Call Us Today: 919-854-7986
QOLSYS IQ WIRELESS SMOKE/HEAT SENSOR
Security Systems
QOLSYS IQ WIRELESS SMOKE/HEAT SENSOR
- Buy 2 for $88.00 each and save 12%
- Buy 3 for $86.00 each and save 14%
- Buy 5 for $84.00 each and save 16%
IQ SMOKE
Photoelectric Smoke Sensor with Built-In Heat Sensor
Receive fire detection alerts by installing the Qolsys IQ Wireless Smoke & Heat Detector. Used with any compatible control panel/receiver (319.5 MHz wireless frequency), such as a GE/Interlogix Panel (NetworX, Simon, etc.) or a Qolsys IQ Panel, this wireless, battery-powered Qolsys smoke detector uses a photoelectric sensor to detect smoke particles, while an integrated heat sensor detects the rapid rise in heat that can come from a fire, ensuring an alarm when a fire is present even if smoke does not reach the wireless heat detector. It also features Chirp Control technology, which silences fault chirps up to 12 hours as well as nuisance alarms up to 10 minutes. This helps prevent annoyance from continuous chirps while you fix issues and avoids unnecessary loud alarms for non-dangerous triggers all while keeping the detector working and ready to alarm if needed. The Qolsys smoke detector easily mounts with the included screws.
Features:
- Photoelectric sensor detects smoke particles
- Supplemental fixed temperature and rate of rise heat sensor
- Compatible with 319.5 MHz wireless panels, such as GE/Interlogix or Qolsys IQ
- Chirp Control silence fault chirps up to 12 hours and nuisance alarms up to 10 hours
- Easier to clean chamber positioned at the top
- Long battery-powered (up to 6 years), no wiring required
Specifications:
- Power Source: 3 AAA PC2400 Duracell Procell batteries (1.5V 1100mAh) or 3 AAA Energizer E92 batteries (1.5V 1100mAh) (included)
- Audible Signal (ANSI Temporal 3): 85dBA min. in alarm
- Sensitivity: 1.5 - 3.5%/foot
- Supplementary Heat Rating: 135°F
- Operating Temperature: 40°F - 100°F (4.4°C - 37.8°C)
- Relative Humidity: 15 - -90% Non-Condensing
- Dimensions: Diameter 5" x 2.5"D
- Regulatory Listing: UL 217
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Replaces part #QOL-QS5110-840.
| Part # | QOL-QS5130-840 |
|---|---|
| MFR | QOLSYS |
IQ SMOKE
Photoelectric Smoke Sensor with Built-In Heat Sensor
Receive fire detection alerts by installing the Qolsys IQ Wireless Smoke & Heat Detector. Used with any compatible control panel/receiver (319.5 MHz wireless frequency), such as a GE/Interlogix Panel (NetworX, Simon, etc.) or a Qolsys IQ Panel, this wireless, battery-powered Qolsys smoke detector uses a photoelectric sensor to detect smoke particles, while an integrated heat sensor detects the rapid rise in heat that can come from a fire, ensuring an alarm when a fire is present even if smoke does not reach the wireless heat detector. It also features Chirp Control technology, which silences fault chirps up to 12 hours as well as nuisance alarms up to 10 minutes. This helps prevent annoyance from continuous chirps while you fix issues and avoids unnecessary loud alarms for non-dangerous triggers all while keeping the detector working and ready to alarm if needed. The Qolsys smoke detector easily mounts with the included screws.
Features:
- Photoelectric sensor detects smoke particles
- Supplemental fixed temperature and rate of rise heat sensor
- Compatible with 319.5 MHz wireless panels, such as GE/Interlogix or Qolsys IQ
- Chirp Control silence fault chirps up to 12 hours and nuisance alarms up to 10 hours
- Easier to clean chamber positioned at the top
- Long battery-powered (up to 6 years), no wiring required
Specifications:
- Power Source: 3 AAA PC2400 Duracell Procell batteries (1.5V 1100mAh) or 3 AAA Energizer E92 batteries (1.5V 1100mAh) (included)
- Audible Signal (ANSI Temporal 3): 85dBA min. in alarm
- Sensitivity: 1.5 - 3.5%/foot
- Supplementary Heat Rating: 135°F
- Operating Temperature: 40°F - 100°F (4.4°C - 37.8°C)
- Relative Humidity: 15 - -90% Non-Condensing
- Dimensions: Diameter 5" x 2.5"D
- Regulatory Listing: UL 217
Installation and service in North Carolina only.
Check out the Mobotix Cameras! Preprogramming can be done before shipping to site.
Replaces part #QOL-QS5110-840.
